Tips to extend the life of your Rimage Everest printer and printhead:

- Only use your Rimage Everest II, III, or 600 printer in a dust free environment, on a desk at least 30" off the floor
- Only use genuine Rimage CMY and transfer roll ribbons. How to change a Rimage Everest ribbon
- Only use Taiyo Yuden CD-r and DVD-r recordable media
- Rotate your print image by 90 degrees clockwise or counter clockwise if you print alot of discs with the same design to keep the image from getting burned into the printhead
- Never stick anything sharp (screwdriver or knife) into your Everest printer to clear any type of printer jam
- Turn your printer off when you will not be using it for one hour or more
- If you are looking for other options in where to buy a new or refurbished Rimage printer or publishing system, visit Techwarestore.com
Keep your Rimage Everest printer clean:
- Clean the Everest printhead every 2000 discs, or bi-weekly. Only use the approved Rimage Everest printhead cleaning kit
- Clean the tacky rollers on the Everest CMY carriage every 2000 discs
- Clean the platen roller in the Everest CD printer if you notice diminished disc print quality (like white specks on your printed CDs or DVDs)
- Clean the air filters monthly. The Everest II and Everest III printers have 1 air filter. The new Everest 600 has 4 air filters
- Clean the exterior of your Everest printer weekly by wiping the exterior of the printer with a lint free cloths